Widemouth U-Trough
- Available for 15′ to 72′ diameter bins, with 8″ and 11″ U-Troughs.
- Flighting sizes range from 7 1/4″ to 9″.
- These troughs come factory assembled as single, double or triple hoppers to unload flat bottom storage bins.
- Powder coated
- All factory construction assures you of quality and long lasting equipment.
Widemouth Gate
- More capacity at first gate
- Allows for clumping in bin, with less restriction of grain flow
- Maximizes grain flow through 360 degree sweep
- Gates run on NyLatron rollers for less friction and ease of opening & closing operation
- Internal linkage to exterior handle gate control
- Backboard clearance adjustment
- Rack and pinion gate control on exterior bin for safe and ease of control of gate openings
Suregrip Wheel
- 18” vulcanized rubber tread design
- Gear reduction 16:1
- Positive traction
- Zero entry
- Easy to retrofit
- Adaptable to gear driven and portable sweeps
- Backboard clearance adjustment
- Standard equipment with complete u-trough package
Gearbox Sweep Drive
- External controls, and externally powered
- Internal shifting mechanisms
- Non spring loaded clutch engage
- The unload flighting drives the sweep through a double gear-box
- The gearbox and sweep can be moved from one bin to another
- Adjustable sweep length
- External Controls
- Self-propelled sweep, no need to enter bin
- Safety stop externally controlled
- Sure Grip Wheel standard equipment
- Optional upgrade from 7 ¼” flighting to 9”
Horizontal Power Head
- For use with unload u-troughs or tubes that are off the ground (24”) to allow room for portable grain auger hopper
- Can be moved from one bin to another and connected to u-trough of unload tube
- Quick detach motor mount is provided to move motor from bin to bin, or to store during the off season
- Available in electric or hydraulic drives
- Factory installed oil impregnated hanger bearing
- Factory installed shaft eliminates stop and maintains flighting clearance
Horizontal U-Through Power Head: 25 Degree Incline Power Head
- Designed to raise unloading discharge height 24” above the floor level of grain bin, this is sufficient height for portable auger hoppers to go under discharge spout
- Comes with a stand to support weight or an optional 2-wheel caddy which permits power head and flight to be moved from bin to bin
- Available in electric or hydraulic drives
