Providing the ability to efficiently move your material at high rates of incline
INCLINE CHAIN CONVEYOR
The Norstar Incline Conveyor allows you to move grain at high rates of incline not achievable with an En-Masse. The Incline Conveyor is most commonly used in receiving applications. The options of a 15°, 25°, 35° or 45° incline coupled with a taller paddle design enables grain to be conveyed at an incline while preventing back flow.
Norstar Incline Chain Conveyors give you the ability move your grain at increased levels of incline, allowing for variable discharge heights from a lower intake position. 15°, 25°, 35° and 45° incline elbows are available.
Norstar Chain Conveyors offer exceptional protection against product contamination. The fully-enclosed housing with UHMW shaft seals ensures the conveyor remains weather tight, negates the need for external dust control and prevents product drop-off commonly seen in other open-housed conveyance. Features like our Self-Cleaning Tail and optional items like our Cleaning Paddles further ensure the quality of your product.
Norstar Chain Conveyors feature bolt-on conveyor covers that are easily removed and provide extensive access for inspection and clean-out. Chain repair can be executed far more efficiently than belt or auger repair (no more time-consuming splicing of belts). Loosen or tighten the chain easily with the screw-in tension system.
Two CHAMBER DESIGN
Norstar Incline Chain Conveyors feature a two chamber (upper & lower) design. The dividing panel between the chambers is slotted and allows grain to slide through with no pinch points.
All Norstar Chain Conveyors feature our standard Self-Cleaning Tail. The tail section features a curved back wall that prevents material from building up in the back corner of the tail. This curved wall is attached to the unit's tension system and not to the conveyor housing itself, meaning that when the shaft is moved to tension the chain, the curved wall moves with it to retain close proximity to the paddles.
Norstar uses UHMW paddles that prevent steel-to-steel contact, minimizing noise and helping to increase the lifespan of the chain. Heavy Duty Paddle Attachments are welded to the chain to provide increased strength to the paddle. The paddles are factory bolted onto the attachments for added stability.
Norstar offers multiple inlet options that allow you to control the grain flow into your conveyor. Wide and Narrow Inlets, Flanged Inlets, Inlet Hoppers and Drive-Over Hoppers with Inlet Section Grating are available.
Norstar offers a range of discharge options. From various transitions to custom designed discharge attachments.
Conveying material that is harsh on your equipment? Ensure the longevity of a Norstar Chain Conveyor with our range of housing liners. Available in 10ga, 3/16" and 1/4" thicknesses, Norstar offers AR200 or AR400 steel liners as well as UHMW liners depending on your needs.
CHAIN AND PADDLE OPTIONS
Norstar offers 81X, 81XH and 81XHH chain depending on your operational requirements. Optional Polyurethane Cleaning Paddles that slide against the conveyor floor help further reduce the risk of cross-contamination during handling.
All Norstar Chain Conveyors feature our Premium Polyester Powder Coat Finish that offers a strong and durable finish with excellent protection against the elements. Norstar also offers Galvanized or Stainless Steel conveyor models.
We offer a range of monitoring and automation options that allow you to effectively manage your handling operation and ensure that it is running at peak capacity. Ask our sales team about what monitoring options are available for your conveyor.
FOR CONVEYOR SIZES GREATER THAN 24" CONTACT US USING THE FORM BELOW