Please drag & drop 3 more SECTION elements to below this section. If you enable sections 6 and 7, you must drag and drop 5 more SECTION elements.
|
CAPACITY RANGE ►
1,000 - 60,000 BPH |
CONVEYOR SIZE ►
9", 12", 15", 18", 21", 24", 27", 30", 36" |
MAX LENGTH ►
150' |
FINISHES ►
Powder Coated Galvanized Stainless Steel |
|
LESS HORSEPOWER REQUIRED.
The En-Masse works in such a way that the paddles drag along the conveyor floor, pushing the material at the bottom of the conveyor. The bottom layer of material that is moving carries all of the material lying on top of it along as well. This creates less torque which requires less horsepower.
|
|
|
BEST IN DUST CONTROL & CONTAMINATION PROTECTION.
The fully-enclosed conveyance chamber contains dust, prevents any product drop off and protects from external contaminates. UHMW Shaft Seals also protect your commodities from external contamination. Features like our Self-Cleaning Tail and Cleaning Paddles make cleaning the conveyor easy.
|
|
|
MAXIMIZE YOUR FILL RATE.
Norstar En-Masse Drag Chain Conveyors feature a fully-enclosed housing with an open interior that promotes a higher fill rate than other forms of conveyance.
|
|
|
SELF-CLEANING.
All Norstar Drag Conveyors feature a curved back plate in the conveyor's tail section that prevents material build up. The plate is attached to the tensioning system and moves along with adjustments to maintain close proximity to the conveyor paddles.
|
|
|
QUIET OPERATION WITH MINIMAL WEAR.
UHMW paddles are gentle on the conveyor housing and eliminate steel-on-steel contact. We use UHMW return rollers to ensure low impact chain support that minimizes noise and chain wear.
|
|
|
PROTECTING YOUR PRODUCT QUALITY.
Our elongated discharge allows material to exit the conveyor prior to the sprocket, eliminating crush/pinch points.
|
|
|
STANDARD FEATURES
• Heavy-Gauge Conveyor Body (10 ga.)
• Fully-Enclosed Conveyor Housing
• Removable Conveyor Covers
• CNC Machined 1/2" Thick UHMW Paddles w/ HD Back Plates
• UHMW Return Rollers
• Self-Cleaning Tail Section
• Flange Head Bearings
• Heavy-Duty Pillow Block Tail Bearings
• UHMW Shaft Seals
• ACME Screw Slack Adjustment
• Elongated Discharge
|
|
CHAIN SIZED TO MEET YOUR APPLICATION.
Our conveyor chain is sized to meet your application and is available in multiple models and grades.
|
|
|
VARIOUS IN-LOAD OPTIONS.
We offer Drive-Over Pits and other inlet options to fit your needs.
|
|
|
PROTECT PRODUCT WITH OUR GATES.
Norstar's Cross Slide Gate is flush mounted. Because it sits flush with the conveyor floor it has no cracks or lips for material to get caught or damaged against.
|
|
|
|
WESTERN CANADA SALES
NORTH CENTRAL & WEST US SALES
EASTERN CANADA / NORTH EAST
US SALES SOUTHERN US SALES
COMMERCIAL/INDUSTRIAL SALES
CHIEF SALES OFFICER/
BUSINESS DEVELOPMENT/ INTERNATIONAL SALES |