Please drag & drop 3 more SECTION elements to below this section. If you enable sections 6 and 7, you must drag and drop 5 more SECTION elements.
|
CAPACITY RANGE ►
1,000 - 40,000 BPH |
CONVEYOR SIZE ►
9", 12", 15", 18", 21", 24", 27", 30", 36", 44" |
INCLINE RANGE ►
15°-45° |
FINISHES ►
Powder Coated Galvanized Stainless Steel |
|
MAINTAIN CAPACITY AT AN INCLINE.
Norstar Incline Drag Chain Conveyors have a two-chamber design that sees the discharge and return chambers divided by a steel plate. Larger UHMW paddles ensure that material can be moved at a steep incline within these chambers with minimal fall back.
|
|
|
BEST IN DUST CONTROL & CONTAMINATION PROTECTION.
The fully-enclosed conveyance chamber contains dust, prevents any product drop off and protects from external contaminates. UHMW Shaft Seals also protect the commodity being conveyed. Features like our Self-Cleaning Tail and Cleaning Paddles make cleaning the conveyor easy.
|
|
|
STEEP HANDLING.
Our Incline Drag Conveyors can be equipped with elbow sections ranging from 15° to 45° in incline, allowing you to move your material where it needs to go.
|
|
|
SELF CLEANING.
All Norstar Drag Conveyors feature a curved back plate in the conveyor's tail section that prevents material build up. The plate is attached to the tensioning system and moves along with adjustments to maintain close proximity to the conveyor paddles.
The two-chamber divider plate is slotted to ensure that material slides through to the discharge and is not left in the return chamber. |
|
|
QUIET OPERATION WITH MINIMAL WEAR.
UHMW paddles are gentle on the conveyor housing and eliminate steel-on-steel contact. We use UHMW return rollers to ensure low impact chain support that minimizes noise and chain wear.
|
|
|
PROTECTING YOUR PRODUCT QUALITY.
Our elongated discharge allows material to exit the conveyor prior to the sprocket, eliminating crush/pinch points.
|
|
|
STANDARD FEATURES
• Two-Chamber Design with Divider Plate
• Heavy-Gauge Conveyor Body (10 ga.)
• Fully-Enclosed Conveyor Housing
• Removable Conveyor Covers
• CNC Machined 1/2" Thick UHMW Paddles w/ HD Back Plates
• UHMW Return Rollers
• Self-Cleaning Tail Section
• Flange Head Bearings
• Heavy-Duty Pillow Block Tail Bearings
• UHMW Shaft Seals
• ACME Screw Slack Adjustment
• Elongated Discharge
|
|
VARIOUS IN-LOAD OPTIONS.
We offer Drive-Over Pits and other inlet options to fit your needs.
|
|
|
CHAIN SIZED TO MEET YOUR APPLICATION.
Our conveyor chain is sized to meet your application and is available in multiple models and grades.
|
|
|
|
WESTERN CANADA SALES
NORTH CENTRAL AND WEST US SALES
EASTERN CANADA / NORTH EAST
US SALES SOUTHERN US SALES
COMMERCIAL/INDUSTRIAL SALES
CHIEF SALES OFFICER/
BUSINESS DEVELOPMENT/ INTERNATIONAL SALES |